List of used CNC machinery for sale

Serial # NR24849, built and installed 1995

Basic Specifications: Swing over bed 17” Maximum turning diameter 12” Chuck size 8” Bar capacity 2.0” Turning length 15” Spindle speeds 30 – 5,0000 RPM Spindle motor 15 HP Turret 10 station KV quick change Tailstock taper and stroke #5 MT / 15.7” Controller Fanuc Seicos LIII Net weight 10,100 lbs

Complete With: 8” chuck Tool pre-setter Chip conveyor Quick Change KV tooling Manuals Condition: Good working condition.

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB Delta B.C., Canada
Specifications are correct to the best of our knowledge
No warranty implied or offered

Serial # 664, built and installed 1989

Basic Specifications: Swing over bed 17” Maximum turning diameter 10” Chuck size 10” Bar capacity 2.5” Turning length 24” Spindle speeds Low Gear 10 – 1,060 RPM High Gear 35 – 3,500 RPM Spindle motor 25 HP C axis .001” deg. Turret 12 station 6 live tool stations Tailstock taper and stroke #5 MT / 4.0” Controller Fanuc O-T Floor space 130” x 79” Net weight 10,700 lbs

Complete With: 10” chuck Tool pre-setter Chip conveyor 4 - Z axis and 6 X axis rotary tools Manuals Condition: Good working condition.

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB Delta B.C., Canada
Specifications are correct to the best of our knowledge
No warranty implied or offered

Serial # 5679, Built 1989

Basic Specifications: Table surface 36 x 16” Travels X,Y and Z 30.12, 16.14, 16.14” Yuasa 4 th axis indexing table 8” chuck. Distance spindle to table 5.91 – 22.05” Spindle taper BT40 Spindle motor /speeds 7.5 HP, 40 – 5,300 RPM Cutting feeds 0.01 – 236 IPM Rapid traverse rates X & Y 787, Z 472 IPM ATC capacity 30 tools CNC controller FANUC 10M Machine floor space 96” x 71” Machine net weight 8,800 lbs.

Complete With: Coolant system Manuals Condition: Good working condition.

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB Delta B.C., Canada
Specifications are correct to the best of our knowledge
No warranty implied or offered

Serial # 5519, Built 1987

Basic Specifications: Table surface 28 x 16” Travels X,Y and Z 22.05, 16.14, 16.14” Distance spindle to table 5.91 – 22.05” Spindle taper BT40 Spindle motor /speeds 7.5 HP, 40 – 5,300 RPM Cutting feeds 0.01 – 236 IPM Rapid traverse rates X & Y 787, Z 472 IPM ATC capacity 30 tools CNC controller FANUC OM Machine floor space 79” x 71” Machine net weight 8,360 lbs.

Complete With: Coolant system Manuals Condition: Good working condition.

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB Delta B.C., Canada
Specifications are correct to the best of our knowledge
No warranty implied or offered

Daewoo Lynx 210 LC

serial L2103178, Built, sold and installed mid 2003, 500 hours, like new

Basic Specifications: Swing over bed 20” Maximum turning diameter 11” Chuck size 8” Bar capacity 2.5” Turning length 20” Spindle speeds 45 – 4,500 RPM Spindle motor 15 HP Turret 12 station Tailstock taper and stroke #4 MT / 2.6” Controller Fanuc 21i-T Floor space w/o B.F or C.C. 87” x 63” Net weight 7,943 lbs

Complete With: 8” chuck Tool presetter Tailstock Parts catcher LNS ECO Load magazine bar feed system Chip conveyor ATS dead length collet chuck S26 collets

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB Vernon, B.C. Canada
Specifications are correct to the best of our knowledge
No warranty offered or implied

Mazak Model AJV-35/80 Bridge Type Vertical Machining Center

Serial # 78915, built and installed 1989

Basic Specifications: Table size 29.52 x 88.18” Table load capacity 6,000 lbs Travels X,Y and Z 78.7” x 31.5” x 20” Distance spindle to table 7.87” – 27.87” Distance between columns 34.64” Spindle taper CAT 50 Spindle speeds 35 – 3,500 RPM Main motor 30 / 20 HP ATC capacity 30 tools Controller MAZATROL M32 Machine net weight 27,500 lbs

Equipped with: Flood coolant Complete enclosure Lift up type chip conveyor Matsumoto 16” diameter rotary table with tailstock Full 4 th axis drive system Condition: Good working condition, ATC needs a little work

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB Lower Mainland B.C. Canada
Specifications are correct to the best of our knowledge
No warranty implied or offered.

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB present location, Lower Mainland, B.C. Canada
Specifications are correct to the best of our knowledge
No warranty implied or offered.

OKUMA Model MC60VAE Vertical Machining Center

Serial # 0545, built and installed 1996

Basic Specifications: Table size 60 x 25” Travels: X, Y and Z 59” x 24.8” x 224.02” Spindle taper CAT 50 Spindle speeds 10 – 5,000 RPM Spindle motor 30 HP ATC capacity 20 tools Controller OSP7000M Machine net weight 28,000 lbs.

Equipped With: Flood coolant Table chip guard Lift up type chip conveyor Manuals Condition: Excellent working condition

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Available immediately, FOB Lower Mainland B.C., Canada
Specifications are correct to the best of our knowledge
No warranty implied or offered

 

MATSUURA MODEL 800VF
VERTICAL MACHINING CENTER

Serial # 930710298, Built 1993

Basic Specifications: Table surface 46 x 18” Travels X,Y and Z 31.5, 17.32, 19.09” Distance spindle to table 6.8 – 27” Spindle taper BT40 Spindle motor and speeds 15 HP, 80 – 8,000 RPM Cutting feeds 0.01 – 196 IPM Rapid traverse rates X & Y 787, Z 560 IPM ATC capacity 30 tools CNC controller Yasnac Machine floor space 133” x 133” Machine net weight 15,000 lbs.

Complete With: Coolant system including coolant thru spindle Lift type chip conveyor Manuals Condition: Good working condition. Replaced by new machine.

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

 Available immediately, FOB Surrey, B.C.
Specifications are correct to the best of our knowledge
No warranty implied or offered.

STANKO Model 165 Heavy Duty Engine Lathe

# 16716 Built aprox 1988

Basic Specifications: Swing over bed 41.5” Swing over cross slide 26.5” Distance between centers 177” Spindle bore 3.15” Spindle speeds 5 - 500 RPM (24) Spindle motor 20 KW Electrics 440/3/60

Equipped With: Flood coolant 39.4” 4 jaw independent chuck

Please contact Jeremy Paine for price. +1-604-940-1657 or e-mail to jeremy@painemachine.com

Machine is in good working condition. Is being sold to make room for a new CNC machine.
FOB present location, Vancouver Island, B.C.. As is, where is.
Available immediately
No warranty offered or implied
Specifications are correct to the best of our knowledge